KATOOL KT-WL70 Rim Straightener Machine Hydraulic with 15MPa Work Pressure

Katool KT-WL70 Hydraulic Rim Straightener with 15 MPa Working Pressure

Some bends do not come out gently. A hard kerb strike on a heavy truck rim or a wide commercial alloy needs real pressure behind it, and a light machine simply stalls against the metal.

The Katool KT-WL70 works at 15 MPa behind a 15 kW power unit, taking wheels up to 760 mm (30 in) across and 550 mm (22 in) wide on rims from 10 to 22.5 in.

Why Choose the KT-WL70

It has the pressure to move metal that a lighter straightener only pushes against.

• 15 MPa working pressure from a 15 kW unit — enough force for heavy rims and stubborn deformation.
• Wheels to 760 mm (30 in) diameter, 550 mm (22 in) wide — wide commercial and oversized fitments fit the machine.
• 10 to 22.5 in rim range — covers passenger, light-truck and 22.5 in commercial rims.
• Under 79 dB at 260 kg — a heavy, planted machine that stays workable in an occupied bay.

Made For

Built for shops repairing wheels as a service line, not an occasional favour.

• Alloy and commercial wheel repair specialists
• Tire and wheel service centers
• Truck and fleet maintenance facilities
• Dealership service departments
• Custom wheel shops

Features

• 15 MPa hydraulic working pressure — force sized to heavy and severely bent rims
• 15 kW power unit — pressure delivered without fading through the stroke
• 760 mm (30 in) max wheel diameter — oversized wheels handled
• 550 mm (22 in) max wheel width — wide commercial fitments included
• 10 to 22.5 in rim capacity — passenger through 22.5 in commercial
• 220V or 380V supply options — configurable to the shop's service
• 260 kg (573 lb) machine weight — mass that absorbs the reaction load
• Under 79 dB operating noise — workable alongside other bays

Pressure Is What Moves a Heavy Rim

A bent rim resists in proportion to its section. A thin passenger alloy gives with modest force; a 22.5 in commercial rim or a heavy cast wheel does not, and a machine without the pressure behind it just deflects while the metal stays where it was.

The KT-WL70 runs at 15 MPa from a 15 kW power unit. That is enough to press the heavy sections back in controlled stages, which is the only way a repair holds — metal that has been forced too fast springs, and metal that has been struck cracks.

Capacity matches the pressure. Wheels up to 760 mm across and 550 mm wide mount on the machine, on rims from 10 to 22.5 in, so the wheels that justify a machine this size actually fit it.

Built to Stay Planted

At 260 kg (573 lbs) the KT-WL70 has the mass a 15 MPa ram needs under it. Reaction force goes into the frame rather than moving the machine, which is what keeps a measured correction accurate from one stage to the next.

The machine stands 1390 mm high on a 1400 by 900 mm footprint, and the crate measures 1000 by 500 by 1400 mm. Power is 220V or 380V, configurable to the shop's service.

Operating noise stays under 79 dB. For a hydraulic machine working heavy metal that is quiet enough to run without shutting down the bays around it.

The Right Rim Straightener for Your Shop

For heavy rims and severe damage, the KT-WL70 is the machine: 15 MPa from a 15 kW unit, wheels to 30 in, and rims from 10 to 22.5 in.

Don't wait — scroll back up and click the orange Add to Cart button to get this rim straightener on its way to your shop.

Technical Specifications

Owner's Manual

Download the Katool KT-WL70 owner's manual for installation instructions, operating procedures, and safety information. Download Manual