KATOOL KT-T810 Wheel Clamp Tire Changer Machine Professional Grade with 41" Max Wheel Diameter

Katool KT-T810 Tire Changer with Bead Blast Seater

Some tires just will not seat — stiff sidewalls sit off the rim while air hisses uselessly past the bead. Every one of those costs a tech time and patience.

The Katool KT-T810 wheel clamp tire changer fixes that with a bead blast seater and post tank: a stored-air blast that snaps tough beads onto the rim instantly. Underneath it is a 2.0 HP machine rated for wheels up to 41 in.

Why Choose the KT-T810

The KT-T810 pairs everyday clamping with a bead blast system — the feature that turns the worst seating jobs into a one-second pop.

• Bead blast seater with post tank — tough, stiff-sidewall beads seat instantly on stored air.
• Hardened alloy steel jaws — carburized and quenched for grip that lasts years.
• Stainless steel mounting head with protective covers — rim-safe contact on alloy wheels.
• Add the KT-MC1 motorcycle adaptor for bike wheels — the machine accepts it directly.

Made For

Built for bays where difficult tires are part of the daily mix.

• Tire shops seating stiff and low-profile tires daily
• General repair bays with a tire machine in rotation
• Shops working alloy and coated wheels
• Serious home garages upgrading from hand tools
• Bays adding motorcycle work with the adaptor

Features

• 41 in max wheel diameter — cars, SUVs, and light trucks
• 15 in max wheel width — room for wide tires
• Bead blast seater with post tank — instant seating on tough beads
• 12–22 in outside / 14–24 in inside clamps — the everyday wheel range
• 2.0 HP motor, 120V single-phase — steady torque on common power
• Hardened alloy steel jaws — carburized and quenched gripping surfaces
• Stainless mounting head with covers — protects wheel finishes
• Pedal-controlled inflation gauge — seat and inflate without leaving the machine

The Bead Blast Difference

The post tank stores compressed air and releases it in one sharp blast through the jaws, forcing the bead out against the rim as inflation starts. Tires that would sit unseated through minutes of coaxing pop into place at once.

The pedal-controlled inflation gauge finishes the job in the same position — clamp, blast, seat, inflate, done.

Hard Parts Where It Counts

The clamping jaws are alloy steel, carburized and quenched — hardened where they bite so the grip stays precise after years of daily cycles. The stainless steel mounting head wears protective plastic covers at every contact point.

Pull-type pedals run the machine hands-free, and the 6.8 r/min turntable keeps every rotation controlled on the 410 lb frame.

The Right Tire Changer for Your Shop

If stubborn beads are the daily reality, the KT-T810 is the cure: 41 in capacity, hardened jaws, and a bead blast system that ends the fight before it starts.

Don't wait — scroll back up and click the orange Add to Cart button to get this tire changer on its way to your shop.

Technical Specifications

Owner's Manual

Download the Katool KT-T810 owner's manual for installation instructions, maintenance guidelines, and safety information. Download Manual