Katool AV6 Pro Mobile 3D Wheel Aligner for 2-Post and Scissor Lifts
Most shops skip alignment work for one reason: there is no bay to give up. A dedicated rack and pit eats a bay that already pays its way.
The Katool AV6 Pro is a mobile 3D wheel aligner that works on the 2-post or scissor lift you already own. Two 3D cameras ride on a remote-controlled post that tracks the vehicle height for you, so the bay goes back to normal work the minute the alignment is done.
Why Choose the AV6 Pro
It turns a lift you already have into an alignment bay, without giving up the floor.
-
Remote-controlled auto-tracking post — the camera height follows the lift, so the tech sets the car and stays with the car.
-
Runs on your existing 2-post or scissor lift — no rack, no pit, no bay taken out of rotation.
-
Ready to measure without a calibration procedure at installation — set it in position and start reading angles.
-
Cabinet-free layout — the whole system stores against a wall between jobs.
What's Included
- Katool AV6 Pro dual-camera 3D alignment system with remote-controlled post
- Tablet
- 30-inch display screen
- Mouse and keypad
- Printer
- WiFi device
- USB drive
Made For
Built for shops adding alignment without adding square footage.
- Independent auto repair shops
- Tire and wheel service centers
- Suspension and performance shops
- Fleet maintenance facilities
- Mobile and multi-location service operations
Features
-
Two-camera 3D measurement system — wheel angles read optically, nothing clamped to the rim face
-
Remote-controlled post with automatic height tracking — camera position follows the lift without a second trip across the bay
-
No calibration required at installation — the system reads accurately from setup
-
Android and iOS software platform — readings mirror to a phone or tablet anywhere around the car
-
Unlimited vehicle specification memory — factory specs and customer records never hit a storage cap
-
US, European and Asian vehicle database with free yearly updates — new model years stay covered
-
Tire diameter 9 27/32 to 31 1/2 in, track width up to 177 11/64 in — covers cars, SUVs and light trucks
-
100–240V, 50/60 Hz single phase — plugs into standard shop power
The Post Follows the Lift, Not the Tech
On a mobile alignment system the cameras have to sit at the right height for the wheels. On a basic system that means walking back to the post every time the lift moves, cranking it, and walking back to the car.
The AV6 Pro post is remote-controlled and tracks vehicle height automatically. Raise the lift to work under the car, drop it to set toe, and the cameras stay pointed where they need to be. The tech stays on the job instead of on the post.
Because the system needs no calibration procedure at installation, that convenience starts on day one rather than after a setup ritual. Position it, power it up, and measure.
Alignment Data on Every Screen in the Bay
The AV6 Pro runs on Android and iOS rather than proprietary software, and the readings mirror across devices. The included 30-inch display sits where the tech can see it, and the same live numbers appear on the tablet or on a phone.
That matters most at the back of the car. Setting rear toe usually means adjusting blind and walking around to check. With the reading in hand, the adjustment and the confirmation happen in the same place.
It also gives the customer something to look at. When a shop can show a measurement against the factory spec on screen, the conversation about why the work is needed gets a lot shorter. The vehicle database covers US, European and Asian brands and updates free every year, so the factory number is there to compare against.
The Right Wheel Aligner for Your Shop
To add alignment revenue without surrendering a bay, the AV6 Pro is the machine: dual-camera 3D measurement, a remote auto-tracking post, and a cabinet-free build that works on the lift you already own.
Don't wait — scroll back up and click the orange Add to Cart button to get this wheel aligner on its way to your shop.
