Alumi-Loc Mounting Hardware Kit — Complete Install Hardware and Tools
Half-finished installs happen because the hardware bag was short one jack nut. Then the ramp channel sits in the shop for a week waiting on a fastener.
This kit is the full hardware set for an Alumi-Loc ramp attaching system: eight 10-24 jack nuts, eight stainless 10-24 x 1-1/2" screws, a hex cap screw, the jack nut setting tool, both Allen wrenches and the 3/8" drill bit. Nothing else to source.
Why Choose the Alumi-Loc Hardware Kit
It is the complete install set — fasteners and the tools that set them.
-
Everything for one install — fasteners, setting tool, wrenches and the drill bit in one kit.
-
Stainless screws so the fasteners do not seize into the channel a season later.
-
Jack nut tool included, which is the part most people do not own.
- Made in the USA and matched to the Alumi-Loc channel it installs.
What's Included
- (8) 10-24 jack nuts
- (8) 10-24 x 1-1/2" stainless screws
- (1) 10-24 x 1-1/2" hex cap screw
- (1) Jack nut hex tool
- (1) 5/32" hex Allen wrench
- (1) 1/8" hex Allen wrench
- (1) 3/8" drill bit
Made For
Built for anyone fitting an Alumi-Loc ramp attaching system.
- Trailer and tailgate owners fitting a ramp channel
- Powersports haulers running hook-end ramps
- Trailer dealers and upfitters
- Fleet and shop technicians
- Anyone replacing lost or corroded install hardware
Features
-
(8) 10-24 jack nuts — the blind fasteners that let the channel mount to a single-sided surface.
-
(8) 10-24 x 1-1/2" stainless screws — stainless so they come back out years later.
-
(1) 10-24 x 1-1/2" hex cap screw — the fastener for the channel end stop.
-
(1) Jack nut hex tool — sets the jack nuts without a dedicated riveter.
-
(1) 5/32" hex Allen wrench — sized to the kit fasteners.
-
(1) 1/8" hex Allen wrench — the second size the install calls for.
-
(1) 3/8" drill bit — the exact hole size the jack nuts need.
-
Made in the USA — built in an American plant.
What the Kit Covers
An Alumi-Loc channel mounts to a tailgate or deck edge where you can only reach one side. Jack nuts are what make that possible — they set from the front and give you a threaded hole in sheet material.
Setting them needs a tool. This kit includes it, which is the difference between finishing the install on a Saturday and ordering a tool on Monday.
Eight nuts and eight screws is a full channel. The hex cap screw, both Allen sizes and the 3/8" bit complete the job.
Stainless, and Why
The screws are stainless. A ramp channel lives outside on a trailer or tailgate, and plated steel screws in aluminum are a corrosion pair that seizes.
The drill bit is 3/8" because that is the hole the jack nuts are sized for. Drilling by eye and hoping is how a jack nut spins in its hole.
The whole kit weighs about a pound, so it is a part to keep in the trailer box for the next install as much as this one.
The Right Hardware for Your Alumi-Loc Install
If you are installing an Alumi-Loc channel, this is the hardware set that finishes it in one sitting.
Don't wait — scroll back up and click the orange Add to Cart button to get this hardware kit on its way to your shop.
