Caliber RampPro HD Snowmobile Ramp — 3,000 lbs, 52" W x 94" L x 2-1/2" H
Most shops end up with three ramps: one for the sled, one for the quad, one for the bike. They all take up space and only one gets used at a time.
The RampPro HD Snowmobile Ramp is rated at 3,000 lbs and measures 52" W x 94" L x 2-1/2" H. LowPro GripGlides provide traction for loading and walking; integrated fingers and integrated feet.
Why Choose the Caliber RampPro HD Snowmobile Ramp
Built for the hauler loading more than one kind of machine, with every figure on this page taken from Caliber.
-
3,000 lbs — the rating Caliber publishes, not a number rounded up.
-
Traction — LowPro GripGlides provide traction for loading and walking; integrated fingers and integrated feet.
-
In The Box — Ramp, 1 Retrax accessory strap (PN 13548), 1 clevis pin.
What's Included
- Ramp
- 1 Retrax accessory strap (PN 13548)
- 1 clevis pin
Made For
Built for anyone hauling powersports machines who wants the job to stop being a fight.
- Snowmobile and snowbike owners
- ATV and UTV owners
- Dirt bike and motorcycle transport
- Golf cart and utility vehicle loading
- Multi-sport haulers
Features
-
Dimensions (Open) — 52" W x 94" L x 2-1/2" H.
-
Dimensions (Closed) — 27" W x 94" L x 5-1/2" H.
-
Weight — 65 lbs.
-
Load Rating — 3,000 lbs.
-
Rated Capacity per Side Section — 1,250 lbs.
-
Rated Capacity with Center Section Removed — 2,500 lbs.
-
Maximum Loaded Vehicle Width (complete ramp) — 52 inches.
-
Maximum Recommended Load Surface Height — 45 inches.
What It Is Rated For
Caliber rates this at 3,000 lbs. That is the figure the manufacturer publishes, and it is the one on this page — nothing here is rounded up to make the product look stronger than it is.
Compatibility: UTVs, ATVs, Snowmobiles, Snowbikes, Dirt bikes, Motorcycles and Golf Carts.
Every figure in the table below comes from Caliber. Where the manufacturer publishes no number for something, this page leaves it out rather than filling the gap.
Fitting and Using It
Tools required: 6mm Allen key, 13mm socket/wrench.
Also available: RampGrips (PN 13204) sold separately.
Read the manufacturer instructions before you start; the order the parts go together in is not always obvious from the box.
The Right Loading Ramp for Your Setup
If a loading ramp is what your setup is missing, this is Caliber's answer at 3,000 lbs.
Don't wait — scroll back up and click the orange Add to Cart button to get this ramp on its way to your shop.