Black Widow UTV-6520 Ride Master Arched UTV Ramps — 3,000 lb on 15 lb Runners
A side-by-side is heavy and wide, and most ramps that can carry one are heavy to match. That turns every load into a two-person job before the machine has even moved.
The UTV-6520 carries 3,000 lbs across the pair while each runner weighs 15 lbs. They are 20-1/4 inches wide, arched, and rungs sit 3 inches apart.
Why Choose the UTV-6520
UTV capacity without UTV-sized ramps to carry.
-
3,000 lb capacity for the pair — covers a loaded side-by-side, not just a light utility machine.
-
15 lbs per runner — one hand, one trip, no help needed to set them.
-
20-1/4 in runner width — wide enough for the aggressive tyres a UTV runs.
-
Arched profile — clears the low frame and skid plate at the top of the climb.
What's Included
- Pair of Black Widow UTV-6520 Ride Master arched runners
- Safety straps
- Attachment hardware
Made For
Built for loading a side-by-side onto a trailer or into a truck bed single-handed.
- UTV and side-by-side owners loading onto a trailer
- Farm and ranch work moving machines between properties
- Hunting and off-road use where the trailer sits on uneven ground
- Dealers and rental yards loading repeatedly
- Anyone who carries the ramps as often as they use them
Features
-
3,000 lb maximum capacity — rated for the pair
-
5 ft 5 in runner length — sized for trailer decks
-
20-1/4 in runner width — takes wide UTV tyre tread
-
15 lbs per runner — 30 lbs for the set
-
Arched design — clearance for low frames and skid plates
-
3 in rung spacing — always tread engaged on a rung
-
Aluminum construction — light and corrosion resistant
-
1 in profile — a low lip onto the ground
-
Safety straps included — tie the runners to the trailer
Capacity Per Pound of Ramp
The number that matters on a UTV ramp is not just what it carries — it is what it carries against what you have to lift to put it in place.
At 3,000 lbs across two 15 lb runners, this pair carries a hundred pounds of machine for every pound of ramp. That is what makes solo loading realistic: the ramps go out one at a time in one hand, and come back the same way.
The aluminum construction is the reason. A steel runner at this capacity would be double the weight and would rust wherever the finish chips on a trailer deck.
Built Around a UTV, Not a Quad
Side-by-sides run wider tyres and sit lower than a quad, and both facts change what the ramp needs to do.
The runners are 20-1/4 inches across, so a wide UTV tyre sits inside the rail rather than hanging over it. The arch lifts the middle of the climb and flattens both ends, which keeps the skid plate off the crest where a straight ramp would catch it.
Rungs at 3-inch spacing keep tread on a biting surface throughout, which is what a heavy machine needs on a wet trailer or a muddy field rather than a dry driveway.
The Right UTV Ramps for Your Trailer
To load a side-by-side alone, the UTV-6520 is the pair: 3,000 lbs of capacity, 20-1/4 in of width, and 15 lbs per runner to carry.
Don't wait — scroll back up and click the orange Add to Cart button to get this pair of UTV ramps on its way to your shop.
