Black Widow BW-12012-2 Dual Runner ATV Ramps — 10 Feet at 32 lb a Side
Ten feet of ramp usually means weight you notice every time you set it up. That is what stops people buying the length they actually need and settling for something shorter that climbs steeper.
The BW-12012-2 keeps each runner to 32 lbs across a full 10 feet, carries 2,000 lbs for the pair, and folds in half to 5 ft 1/2 in.
Why Choose the BW-12012-2
Long runners without the weight penalty.
-
32 lbs per runner — ten feet of ramp that is still a one-hand carry folded.
-
2,000 lb capacity — a step above the 1,200 lb class, below the heavyweight sets.
-
Folds to 5 ft 1/2 in — halves for storage in a bed or trailer.
-
Powder-coated aluminum — finished against corrosion, not just bare metal.
What's Included
- Pair of Black Widow BW-12012-2 dual runner folding ramps
- Safety straps
- Attachment hardware
Made For
Built for mid-weight machines that need real length into a high bed.
- Mid-size and utility ATVs
- Loading into full-size pickup beds
- Garden tractors and mowers within the rating
- Trailer decks that sit high off the ground
- Anyone who sets ramps up alone and often
Features
-
10 ft runner length — shallow approach angle
-
2,000 lb maximum capacity — rated for the pair
-
12-1/4 in runner width — standard ATV tyre width
-
32 lbs per runner — 64 lbs the pair
-
Folds to 5 ft 1/2 in x 10-3/4 in — half length stowed
-
Powder-coated aluminum — corrosion resistant finish
-
1-1/2 in profile — a low lip at the ground end
-
Safety straps included — ties the runners to the vehicle
Weight Is What Decides If They Get Used
A ramp that is a chore to deploy stays in the garage, and the machine gets loaded some other way — usually a worse one.
At 32 lbs each these are light enough that setting them up is not a decision. Folded to 5 ft 1/2 in they lift out of a truck bed one-handed and go back the same way.
That is the practical value of aluminum over steel at this length. A steel runner of the same span would be near double the weight and would need two hands and a plan.
Ten Feet Into a Full-Size Bed
A modern full-size pickup tailgate sits around 34 to 38 inches off the ground. Over 10 feet that is a gentle climb — roughly half the gradient of a 5 ft ramp into the same bed.
For a mid-weight quad that means the machine drives up under control rather than under power, and comes down without relying on brakes alone.
The 2,000 lb rating covers most utility ATVs with a rack load. Heavier machines or small side-by-sides want the 3,000 lb sets instead.
The Right ATV Ramps for Your Truck
To get real length without real weight, the BW-12012-2 is the pair: 10 ft runners, 2,000 lbs, 32 lbs each, folding to 5 ft 1/2 in.
Don't wait — scroll back up and click the orange Add to Cart button to get this pair of ATV ramps on its way to your shop.
