ATD 2P12SALI Two Post Clear Floor Lift — 12,000 lbs, 75 inches lift height
Twelve thousand pounds is where three-quarter-ton trucks and loaded vans stop being a gamble — provided the paperwork holds up too.
The 2P12SALI Two Post Clear Floor Lift is rated at 12,000 lbs, lifts to 75 inches and runs on 220V, 20A, 1PH. Single point lock release.
Why Choose the ATD 2P12SALI Two Post Clear Floor Lift
Built for the heavy-duty shop that has to show certification, with every figure on this page taken from ATD.
-
12,000 lbs — the capacity ATD publishes, not a number rounded up.
-
Configuration — Symmetric operation.
-
Drive Through Clearance — 109 inches.
What's Included
- MET / UL / CSA certified DURO power unit
- Stackable truck adapters (2.5" & 5")
Made For
Built for anyone lifting heavy who also has to satisfy a certification requirement.
- Heavy-duty truck and van shops
- Dealership service departments
- Fleet and municipal garages
- Shops needing ALI/ETL certification
- Anyone lifting up to 12,000 lbs
Features
-
Load Capacity — 12,000 lbs.
-
Maximum Load per Arm — 3,000 lbs.
-
Overall Height — 168-1/2 inches.
-
Overall Width with Power Unit — 151-5/16 inches.
-
Maximum Lift Height — 75 inches.
-
Inside Column Width — 122 inches.
-
Minimum Pad Height — 4-7/8 inches.
-
Drive Through Clearance — 109 inches.
What It Is Rated For
ATD rates this at 12,000 lbs. That is the figure the manufacturer publishes, and it is the one on this page — nothing here is rounded up to make the lift look stronger than it is.
Maximum Load Per Arm: 3,000 lbs.
Every figure in the table below comes from ATD. Where the manufacturer publishes no number for something, this page leaves it out rather than filling the gap.
Installing and Using It
Power required: 220V, 20A, 1PH. Have the supply in place before delivery — it is the step that most often holds up a lift install.
Supplied with the lift: MET / UL / CSA certified DURO power unit, stackable truck adapters (2.5" & 5").
Check the published dimensions against your bay before ordering — ceiling height, floor slab and door width decide whether a lift fits, not the capacity.
The Right Certified Two Post Lift for Your Bay
If a certified two post lift is what your bay is missing, this is ATD’s answer at 12,000 lbs.
Don't wait — scroll back up and click the orange Add to Cart button to get this lift on its way to your shop.
