ALEKO Madrid Galvanized Steel Fence Kit — 16 ft. of 2-Panel Residential Fencing
Fencing a front boundary usually means three orders: panels from one place, posts from another, and brackets that turn up last. The run sits half-finished while you wait.
The ALEKO Madrid kit covers 16 feet in one box — 2 panels, 2 posts and 8 connector brackets. Welded galvanized steel under a black powder coat, in a Madrid pattern with straight lines and minimal detailing.
What's Included
- 2 Madrid fence panels, 8 ft. W x 5 ft. H each (16 ft. total)
- 2 steel posts, 7.5 ft. L x 2.4" W x 2.4" H
- 8 connector brackets
Made For
Built for residential boundaries and light commercial frontages where the fence is seen from the street every day.
- Front gardens and street-facing boundaries
- Side and rear property lines
- Homeowners extending an existing run
- Fence contractors on residential jobs
- Courtyards, pools and garden enclosures
Features
-
16 ft. of coverage per kit — panels, posts and brackets arrive together in one order
-
Madrid panel design — straight lines and minimal detailing that suit a front boundary or a side run
-
Galvanized steel construction — zinc under the paint, so a scratch does not start rust
-
Black powder-coated finish — resists rust and stops paint chipping outdoors
-
8 ft. wide x 5 ft. tall panels — a residential boundary height that does not need planning drawings
-
7.5 ft. posts for 5 ft. panels — 2.5 ft. of post left to set below grade
-
8 connector brackets included — every fixing needed to hang the panels is in the box
-
Pairs with Madrid-style gates — the driveway gate and the fence line match
Straight-Line Styling
The Madrid panel is a plain vertical pattern with minimal detailing, which is what makes it flexible. It suits a modern build and an older property equally, because it is not trying to imitate either.
The black powder coat carries across panels, posts, and brackets, so a finished run shows one uninterrupted color with no touch-up at the joints.
Galvanized Steel Under a Powder Coat
Galvanizing bonds zinc to the steel before any paint goes on. The powder coat then sits over the top as a second barrier, so a scratch in the black finish does not expose bare steel to the weather.
That two-layer build is the difference between a fence that holds its color for years and one that starts blistering along the welds in the second season.
The Right Fence for Your Property
At 16 feet per kit, the Madrid closes a typical front or side boundary in a single order. Panels bolt to the posts with the included brackets, so a two-person crew can lay the run out without a hardware run mid-job.
Assembly is required, and the 7.5 ft. posts leave 2.5 ft. to set below grade for a rigid line. Longer runs combine kits end to end on the same bracket pattern, and Madrid-style gates are available to match.
Don't wait — scroll back up and click the orange Add to Cart button to get this fence kit on its way to your property.
